Sendun Fusion Splicer
Price: Rs 0.00
SENDUM FUSION SPLICER – Datasheet
| Category | Specification |
|---|---|
| Compatible Fiber / Cable | 0.25–3.0mm Fiber / Indoor Drop Cable |
| Cladding Diameter | 80–150 μm |
| Coating Diameter | 0.125–1.0 mm |
| Cleaved Length | 8–16 mm |
| Splicing Mode | Preset 41 Splicing Modes (Supports up to 100 Custom Modes) |
| Typical Splice Loss | SM: 0.02 dB / MM: 0.01 dB / DS: 0.04 dB / NZDS: 0.05 dB / G657: 0.03 dB (Based on ITU-T Standard Fibers) |
| Estimated Splice Loss Display | Yes |
| Return Loss | ≥60 dB |
| Lighting | Dual High-Intensity White LEDs (for dark environments) |
| Protection Sleeve Length Support | 20 mm / 30 mm / 40 mm / 50 mm / 60 mm |
| Heating Mode | Preset 5 Heating Modes (Supports up to 100 Custom Heating Modes) |
| Heating Tank | Single / Fast Heating |
| Splice Result Storage | Stores 20,000 Splice Records + 200 Images |
| Tension Test | Standard 2.0N Pull Test |
| Fiber Viewing & Magnification | X, Y, XY, X/Y View Modes – 380X Magnification |
| Fiber Holder / Clamp | Multi-Function Universal Fiber Holder (Detachable) |
Power & Performance
| Category | Specification |
|---|---|
| Power Supply | AC 100–240V Input / DC 12–15V External Input |
| Battery Capacity | 5200 mAh Rechargeable Lithium Battery |
| Typical Usage per Charge | ≥240 cycles (Splicing + Heating) |
| Heating Time | ~13 Seconds (Standard Sleeve) |
| Auto-Heating | Supported |
| Auto Calibration | Automatic ARC Calibration (Based on Air Pressure & Temperature) |
| Electrode Life | ~5,000 ARC Discharges |
| Terminal / Connectivity | USB 2.0 (Data & Firmware Upgrade) |
Environmental Conditions
| Operating Altitude | 0–5000 meters above sea level |
| Operating Temperature | −15°C to +50°C |
| Humidity (Operation) | 0–95% (Non-Condensing) |
| Storage Temperature | −40°C to +80°C |
| Battery Storage Recommend Range | −20°C to +30°C |
| Max Wind Speed While Operating | ≤15 m/s |
Display & Interface
| Display Screen | High-resolution Display Screen |
| Controls | Physical Buttons + Touch Panel |