HSGQ Router Configuration - Knowledge Base

HSGQ Router Configuration - Knowledge Base

1. Access Control List (ACL)

The ACL feature is used to restrict access to the router by allowing only specific IP addresses.

Settings:

ü  ACL Capability: Enable/Disable

ü  Enable: Checkbox to activate ACL

ü  Interface: LAN/WAN selection

ü  Start/End IP Address: Define the IP range to be allowed

ü  Services: TELNET, FTP, HTTP, HTTPS, PING, TFTP.

ACL Table:

ü  Lists currently enabled rules

ü  Includes interface, allowed IPs, services, and ports

ü  Allows deleting selected rules

2. PON WAN Configuration

Configures the parameters for the PON WAN connection.

     Settings:

ü  Enable VLAN: Checkbox to enable VLAN tagging

ü  VLAN ID: Optional VLAN configuration

ü  Channel Mode: IPoE or other modes

ü  Enable NAPT: Checkbox to enable NAT

ü  Admin Status: Enable/Disable

ü  Connection Type: TR069, etc.

ü  MTU: Set between 1280-1500

ü  IP Protocol: IPv4/IPv6

ü  WAN IP Settings: Choose between Fixed IP and DHCP.

3. TR-069 Configuration

Allows remote management of the router via an ACS server.

Settings:

ü  TR069 Daemon: Enable/Disable

ü  Enable CWMP Parameter: Enable/Disable

ü  ACS Settings:

§    URL, Username, Password

§    Periodic Inform Interval

ü  Connection Request:  Username, Password, Path, Port (7547)

ü  Certificate Management:

§   Upload CPE & CA Certificates

ü  Enable CWMP WAN ACL: Enable/Disable