Fusion Splicer Fujikura 62S
Fujikura 62S Fusion Splicer
The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62S ensures a high level of productivity. Incorporating the proven rugged features pioneered by Fujikura, durability is greatly enhanced by a mirror less optical system and "severe impact resistant" monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever.
Features:
- 5,000 splices electrode life
- 23 second tube heating time with standard sleeves
- Fully rugged for shock, dust and moisture
- Li-ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs
- Sheath clamp or fiber holder operation
- Multi-function transit case with integrated workstation
Specifications:
| Model | 62S Fusion Splicer |
| Applicable Fibers | Single-mode (G.652 and G.657), Multi mode (G.651), DS (G.653), NZDS (G.655) |
| Cladding Diameter | 80 μm to 150 μm |
| Coating Diameter | 100 μm to 1,000 μm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards |
| Splicing Time | ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core axis alignment data |
| Storage of Splice Result | Last 10,000 results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
| Magnification | 320X for single X or Y view, or 200X for X and Y view |
| Viewing method | Dual cameras with 4.7 inch TFT color LCD monitor |
| Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1.96 to 2.25N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with power save functions activated |
| Electrode Life | 5,000 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery |
| Terminals | USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15 m/s (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches) |
| Weight | 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery |
Hear are some related splicing machine link:
Financing
Estimated delivery date
Leave your detail here, we will call you back
Welcome to Support Center
Support for all your needs, in one place. Sign in to get personalized help and access your registered devices, software and existing service requests.
Why create an account
Unsubscribe
