Fusion Splicer Fujikura 50S
This is a new standard of core to core aligning arc fusion splicer.
A number of improvements have been added to the performance-proven Profile Alignment System (PAS) platform, resulting in the smallest and lightest package of its kind. With improved splice & tube-heat time, the splicing operation is the world's fastest truly optimized for field use. Other valuable features include an ergonomic design, reduced numbers of operating steps and a powerful battery extend the boundaries of traditional field fusion splicing performance. The movable monitor and dual-direction operating system essentially gives the operator a choice of two splicers. With these features, the FSM-50S is now more than a tool, it is a work of art.
Features
- Fully automatic core alignment with 9 second splice time for SM fiber
- Reduced splice protector shrink time ﾖ now only 35 seconds
- Extremely compact and lightweight ﾖ just 2.8kg
- Automatic fibre type identification
- Multi-position monitor for front or top mounting
- High capacity battery option for 120 splice/shrink cycles
- Real time arc calibration
- Fibre clamps integrated into wind protector to reduce operation time
Dual-directional operating system
The reversible monitor accommodates the user's ergonomic preference. With a control panel on each side, the ease of use is phenomenal.
Splice time of 9 sec.
Improved computer processing and newly introduced stepping motor help achieve 9 sec. splice time with SM fiber.
Tube-heat time of 35 sec.
Advanced heater design shortens tube-heat time to 35 sec. with FP-03 protection sleeve.
Large capacity battery option
Two types of slot-in batteries BTR-06S and BTR-06L are available.
Arc calibration-free system
Time-consuming arc calibration is no longer requried with real- time arc calibration.
Specifications:
| Applicable fibers | SM（ITU-T G.652）, MM（ITU-T G.651）, DS（ITU -T G.653）, NZDS（ITU-T G.655） |
| Fiber Count | Single |
| Cladding diameter | 80 to 150μm |
| Coating diameter | 100 to 1000μm |
| Fiber cleaved length | 8 to 16mm with coating diameter of 250μm or less. 16mm with coating diameter of 250 to 1000μm. Optional set-plate for 8 to 16mm with coating diameter of 250 to 1000μm is available. |
| Actual average splice loss | 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T and IEC standards. |
| Splice time | Typical 9sec. with standard SM fiber |
| Return loss | >>60dB |
| Splicing modes | 40 user programmable modes and up to 60 modes for reference（factory predetermined setting） |
| Splice loss estimate | Available |
| Attenuation splice function | Intentional high splice loss of 0.1dB to 15dB（0.1dB step）can be made for an in-line fixed attenuator. |
| Storage of splice result | The last 2000 results to be stored in the internal memory |
| Fiber display | X / Y, or both X and Y simultaneously |
| Magnification | 295x for single X or Y view, or 147x for X and Y view. |
| Viewing method | Two CMOS cameras and 5.6 inch color LCD monitor. |
| Operating condition | 0 to 5000m above sea level, 0 to 95% RH and -10 to 50 respectively. |
| Mechanical proof test | 2N（standard）/ 4.4N（option） |
| Tube heater | Built - in tube heater with 10 heating modes and up to 20 modes for reference |
| Tube heat time | Typical 35sec. with FP-03 protection sleeve |
| Applicable protection sleeve length | 60mm, 40mm and a series of micro sleeves |
| No.of splice/heating with battery | Typical 80 cycles with BTR-06（S）/ Typical 160 cycles with BTR-06（L） |
| Power supply | Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-11. 13.2Vd.c. with BTR-06（S / L）. |
| Terminals | USB 1.1（USB-B type）for PC communication. Video terminal RCA video jack / NTSC |
| Wind protection | Max. wind velocity of 15m/s |
| Dimensions | 150W x 150D x 150H (mm) |
| Weight | 2.3kg（2.8kg including AC adapter ADC-11） |
Hear are some related splicing machine link:
Financing
Estimated delivery date
Leave your detail here, we will call you back
Welcome to Support Center
Support for all your needs, in one place. Sign in to get personalized help and access your registered devices, software and existing service requests.
Why create an account
Unsubscribe
