Lantech SFP-10GB-T Small Form Factor Pluggable SFP+ Copper transceivers are compliant with the current SFP+ Multi-Source Agreement (MSA) Specification. The high-performance design is integrated full-duplex data link at 10 GB/s over four pairs of Category 6a/7 cable up to 30 m. It is specifically designed for high-speed communication links that require 10 Gigabit Ethernet over copper cable.
Parameter | Symbol | Min | Typ | Max | Unit | Notes/Conditions |
---|---|---|---|---|---|---|
Line Frequency | fL | 125 MHz | - | - | - | 5-level encoding, per IEEE 802.3 |
Tx Output Impedance | Zout, TX | - | 100 Ohm | - | Differential | for all frequencies between 1MHz and 125MHz |
Rx Input Impedance | Zin, RX | - | 100 Ohm | - | Differential | for all frequencies between 1MHz and 125MHz |
Single-Ended Data Input Swing | Vinsing | 250 mV | - | 1200 mV | Single ended | - |
Single-Ended Data Output Swing | Voutsing | 350 mV | - | 800 mV | Single ended | - |
Rise/Fall Time | Tr, Tf | - | 175 psec | - | 20%-80% | - |
Tx Input Impedance | Zin | - | 50 Ohm | - | Single ended | - |
Rx Output Impedance | Zout | - | 50 Ohm | - | Single ended | - |
Parameter |
Symbol |
Min. |
Max. |
Unit |
Note |
Storage Temperature |
TsT |
-40 |
+85 |
°C |
|
Supply Voltage |
VccT, VccR |
-0.5 |
+4.0 |
V |
|
Storage Relative Humidity |
RH |
5 |
95 |
% |
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Case Operating Temperature |
ToP |
0 |
– |
+70 |
°C |
|
Supply Voltage |
Vcc |
+3.13 |
+3.3 |
+3.47 |
V |
|
Supply Current |
Icc |
|
|
880 |
mA |
|
Power Consumption @30M |
PCW |
|
|
2.9 |
W |
|
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Note |
Data Rate |
DR |
1 |
10.3125 |
|
GB/sec |
|
Bit Error Rate |
BER |
|
|
10-12 |
|
|
Leave your detail here, we will call you back
Support for all your needs, in one place. Sign in to get personalized help and access your registered devices, software and existing service requests.