D-TECH RS232/485/422 Single-Mode Fiber Optic Transceiver
DT-9077-FC port
Variant Specifications
Warranty:
Weight:
Country of Origin:
More Details:
Import Lead Time:
Package:
Available options
1% OFF
Rs 31,496.87
List: Rs 31,731.93
DT-9077 Industrial RS232 / RS485 / RS422 Fiber Modem
3-in-1 Industrial Serial-to-Fiber Converter • Single Mode up to 20KM
Product Overview
The DT-9077 is an industrial-grade fiber modem designed to extend RS232, RS485 and RS422 serial communication over optical fiber. It provides reliable long-distance data transmission for industrial automation, SCADA, RTU, monitoring and remote communication systems.
The modem supports RS485 2-wire half-duplex and RS422 4-wire full-duplex communication. Transmission distance reaches up to 20KM over single-mode fiber and 5KM over multimode fiber.
|
20KM Single Mode |
460 Kbps RS485 / RS422 |
3-in-1 RS232 / RS485 / RS422 |
Key Features
| ✓ RS232 / RS485 / RS422 in one device | ✓ Baud rate adaptive |
| ✓ Point-to-point fiber communication | ✓ 1310 nm operating wavelength |
| ✓ Single Mode: up to 20KM | ✓ Multimode: up to 5KM |
| ✓ RS485 2-wire half-duplex | ✓ RS422 4-wire full-duplex |
| ✓ RS232 up to 115.2 Kbps | ✓ RS485 / RS422 up to 460 Kbps |
| ✓ ±15 kV ESD protection for RS232 | ✓ TVS protection for RS485 / RS422 |
| ✓ LED status indicators | ✓ Wide DC power input |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | DT-9077 |
| Product Type | Industrial Serial-to-Fiber Modem |
| Serial Interfaces | RS232 / RS485 / RS422 |
| RS485 Mode | 2-Wire Half-Duplex |
| RS422 Mode | 4-Wire Full-Duplex |
| RS232 Data Rate | Up to 115.2 Kbps |
| RS485 / RS422 Data Rate | Up to 460 Kbps |
| Operating Wavelength | 1310 nm |
| Single-Mode Distance | Up to 20KM |
| Multimode Distance | Up to 5KM |
| Fiber Interface | ST Standard; SC / FC Optional |
| Fiber Connection | Dual Fiber; Single Fiber Optional |
| Electrical Connection | Screw Terminal |
| Input Voltage | DC 9–35 V |
| RS232 Protection | ±15 kV ESD Protection |
| RS485 / RS422 Protection | TVS Diode Protection |
| Relative Humidity | 5% – 95% |
Screw Terminal Pin Assignment
| Pin | Signal | RS422 Full-Duplex | RS485 Half-Duplex |
|---|---|---|---|
| 1 | T/R+ | Send (A+) | A+ |
| 2 | T/R− | Send (B−) | B− |
| 3 | RXD+ | Receive (A+) | Not Used |
| 4 | RXD− | Receive (B−) | Not Used |
| 5 | TXD | RS232 Send | |
| 6 | RXD | RS232 Receive | |
| 7 | GND | RS232 Ground | |
| 8 | VCC | DC 9–35 V | |
| 9 | GND | Power Ground | |
| 10 | ETH | ETH Protected Area | |
Optical Fiber Connection
DT-9077 Unit A – TX
→
Optical Fiber
→
RX – DT-9077 Unit B
DT-9077 Unit A – RX
←
Optical Fiber
←
TX – DT-9077 Unit B
Important: For the standard dual-fiber configuration, two DT-9077 units
are required. Connect TX → RX and RX ← TX between the two units.
Typical Applications
| SCADA Systems – Long-distance communication between controllers and remote equipment |
| RTU Communication – Fiber connection for remote terminal units |
| Industrial Automation – Factory, plant and industrial equipment communication |
| Serial Fiber Extension – Extend RS232 / RS485 / RS422 communication over fiber |
| Remote Monitoring – Data acquisition and monitoring over long distances |
DT-9077 Industrial Fiber Communication
A practical solution for converting and extending RS232, RS485 and RS422 serial communication over optical fiber, especially where long distance and electrical isolation are required.
A practical solution for converting and extending RS232, RS485 and RS422 serial communication over optical fiber, especially where long distance and electrical isolation are required.
Ask a question
Questions & answers
0 question(s)No questions yet. Be the first to ask!
0.0
5★
0
4★
0
3★
0
2★
0
1★
0
Write a review
Sign in to reviewCustomer reviews
No reviews yet. Be the first to review this product.
No videos for this product yet
Once videos are added, you’ll see them here as a gallery.