L3 Managed Ethernet Poe Switch HSGQ

HSGQ-5528 Datasheet Overview

Product Description

24 GE+4×10G SFP+ L3 Managed Industrial Switch, support 24×GE+ 4xSFP+ port, 1xType-C Console port, providing complete security policy, perfect QoS policy and rich VLAN function, easy to manage and maintain, meeting the networking and access requirements of enterprises, communities, hotels, office networks and campus networks. ¹¹¹¹

Hardware Specifications

Interface

• Downlink Ports: 24 GE RJ45
• Uplink Ports: 4×10G SFP+
• Console: 1xType-C

Switch Property

• Standards:
• IEEE 802.3, IEEE 802.3u, IEEE 802.ab, IEEE 802.3z
• IEEE 802.3x, IEEE 802.1q, IEEE 802.1p
• IEEE 802.3ad, IEEE 802.1d, IEEE 802.1x
• Forwarding Modes: Store and Forward
• Packet Buffer: 12Mbit
• MAC Table: 32K
• Switching Capacity: 128Gbps/non-blocking
• Packet Forwarding Rate: 95Mpps
• Jumbo Frame: 12KB

Power Supply

• Input Voltage: AC100V-240V, 50Hz/60Hz
• Power Consumption: 35W

Physical Parameter

• Led Indicators:
• 1xPower supply indicators
• 1xSystem working indicator
• 24 RJ45 status indicator
• 4xOptical port status indicator
• Reset Button: Short press to restart the switch, long press to initialise the system
• Dimensions (WDH): 440\times220\times44\text{mm}
• Net Weight: 1.9 KG
• Material: Metal
• Mounting: Desktop/rack-mounted , Desktop/DIN-Raill , Wall Mounted

Key Features

• Support IEEE 802.1d, IEEE 802.1w IEEE 802.1s, IEEE 802.1p, IEEE 802.3, IEEE 802.3u. IEEE 802.3x. IEEE 802.3z.
• IEEE 802.3ab, IEEE 802.3ae Standard
• L3 Management, Support DHCP Server, DHCP Snooping, DHCP Relay, Static Routing, RIP and OSFP
• Support RSTP/MSTP
• Support VLAN function, Port VLAN, translation and Q-in-Q

L3 Function

• Support IPv4/IPv6 Static Route
• Support RIP/RIPNG/OSPF/OSPFV3 Dynamic Route
• Support VRRPv2/VRRPv3
• Support PIM SM/SSM
• Support DHCP Server, DHCP Snooping and DHCP Relay

Software Specifications

System State

• Device Name
• Built Time
• Product Model
• System Time
• System Version
• Current Time
• Running Status
• Firmware Version
• Hardware Version
• Running Time
• Memory Usage
• MAC Address
• CPU Usage

Traffic Monitor

• Received Rate Statistics
• Sent Rate Statistics
• Enable and Disable
• Interval
• Max Monitor Count

System Monitor

• MAC Address Table
• Port State
• Port Speed
• Duplex Mode
• Enable and Disable

Port Setting

• Port Range
• Enable and Disable
• Jumbo Frame

Traffic Control

• Port Range
• Input Speed Limit
• Output Speed Limit

Rate Limi (Limit)

• QoS Priority
• 802.1p QoS Setting
• 802.1p Mark Range
• 802.1p Priority

IP Service

• Interface IP: Network Interface (VID), IPv4 Address
• DHCP Server: Network Interface(VID), Default Gateway, Start IP Address, Max Client Number, Client Lease Time, Preferred DNS Address, Backup DNS Address, WINS Server, Enable and Disable
• Static IP: Network Interface(VID), Default Gateway, Start IP Address, Max Client Number
• IP Routing:
• Routing Table
• OSPF: Enable and Disable, OSPF Host ID, Region ID, Target Network, Next Hop Address, Region Type, Network Interface, Path Consumption

IF Multicast

• IGMP Snooping: Enable and Disable, Group Member Alive Time, IGMP Query setting

Security

• Static Address Lock: MAC Address, VLAN ID, Port
• Rapid Spanning Tree: Enable and Disable, Device Priority, Port State Transition Delay, Modify Configuration, RSTP/MSTP Version, Message Sending Period, This Bridge Update Message, Message Maximum Lifetime, Port Range
• Loopback Protect: Enable and Disable, Port Loop Detection, Protect Automatic Recovery, Disable Loop Port Time

System Management

• Port Mirroring: Enable and Disable, Mirror Port Range, Monitor Port, Collect Data
• SNMP: Read-only Group Name, Enable and Disable, SNMP Version, SNMP Gateway, Read and Write Group Name, SNMP V3: User Name, Read And Write Mode Identity, Authentication, Verify Password, Encryption Protocol, Encryption Password
• Time: Local Time, NTP Sever, World Time Zone, System Time, Using NTP, PC Time, Automatically Adjust Daylight Saving Time
• Syslog: Information Processing, Enable and Disable, Show Type
• Management: Restore Factory Value, System Reboot, Upload Configuration File, System Upgrade, Download Configuration File
• User Setting: Change Password, Access Privilege, Username

Ordering Information

• Product Model: HSGQ-5528
• Description: 24 GE+4x10G

Product Introduction

The 12-port gigabit intelligent standard POE switch, uses high-quality, high-speed network IC and the most stable POE chip. lt can provide seamless connectivity on 10/100/1000M ethernet network. The latest Al function is integrated into the switch, and the port automatically enables Al mode in extend mode. The PoE power supply port automatically detects and supplies power to the powered devices that comply with the lEEE802.3af or lEEE802.3at standards. Non-POE devices do not automatically detect power supply and only transmit data.

POE is an ethernet power supply that transmits data signals to IP-based terminals, such as lP phones, wireless access aps, and network cameras., but also provides DC power to the device. Technically, these devices that receive DC power are called power supply devices.

Simple installation and maintenance methods and rich service functions help users build a secure, reliable and high-performance network. It is manly coated in industrial parks, buildings, factors, mines, government agencies residential broadband and other user network core or fusion laver; lt can be widely applied to Ethernet access scenarios of small and medium-sized enterprises, Internet cafes, hotels, and schools.

Two Types of Uplink Ports

Support electrical modules and optical modules, and can be flexibly configured according to different networking.

Support PoE QoS Priority, priority ranges from 1 to 8. Enabled by default.

High Speed Network Transmission

Ultimate Smooth Experience

Full Gigabit port, 24 Gbps non-blocking line speed forwarding, greatly improve the forwarding rate of large files, to ensure smooth and stable transmission of large files and high-definition video.

Intelligent PoE Power Supply Stable Transmission does not Exceed the Limit

It provides 8 gigabit POE ports that comply with IEEE802.3af/at standards, and the maximum output power of a single port is 30W, which can provide stable power supply and data transmission for HD POE webcams and aps.

Convenient Photoelectric Connection

Remote Networking Worry-Free

The AI mode is automatically enabled 10M speed for Ports 7-8 in Extend mode, and remote networking can be easily implemented at low cost.

Multi-Scenario FTTX Solution

Abundant Terminal Types to Choose from